BIMOSONIC offers single-, dual-, and tri-frequency ultrasonic cleaner configurations for different cleaning requirements. Availability depends on the selected model.
Verified Frequency Configurations
- Single-frequency: 40kHz
- Dual-frequency: 28/40kHz, 40/80kHz, 40/120kHz, or 80/120kHz
- Tri-frequency: 28/40/80kHz, 40/80/120kHz, or 28/40/120kHz
How Frequency Affects Cleaning
Lower frequencies generally produce a stronger cavitation action for robust parts and heavier contamination. Higher frequencies generally produce finer cavitation for detailed or more sensitive surfaces. The correct choice also depends on power, solution, temperature, loading, cycle time, material, and surface finish.
Choosing a Configuration
Choose 40kHz single-frequency for consistent general-purpose workflows. Choose a dual-frequency model when two cleaning actions are required. Choose a tri-frequency model when one tank must support a broader range of compatible parts and process settings.
Documented Performance
The corresponding test report records a 30% improvement in cleaning efficiency under its specified test conditions. Actual results vary by application.
Important Operating Notes
These models do not support 24-hour continuous operation. Follow the operating and cooling intervals in the model manual. For compatible instruments, the intended medical-related application is pre-sterilization cleaning only; ultrasonic cleaning does not replace a validated sterilization process.
Explore the single-frequency, dual-frequency, and tri-frequency ranges or contact BIMOSONIC for model selection.